Operation Manual

1. Adaptor - for insertion over hose and

into back of the air conditioner.

2. Adaptor - for insertion over hose and

into foam strip. (DAC9005)

3. Exhaust hose

4. Foam strip - for filling the open

window space and with hole for

connection to exhaust hose.

5. Foam strip - for filling the open

window space.

6. Round window, floor and wall

connector.

7. Cap for round connector.

8. Water tray.

9. Drain hose.

ACCESSORIES

INSTALLATION

Mounting of the unit

This unit is a PORTABLE AIR CONDITIONER. It can be moved from room to room, so

the cooling can follow you anywhere.The mounting is easy, beneath a window or wall.

Please refer to either of the following ways -

1. Using the foam strips

• Connect the supplied foam

strips with the exhaust pipe,

allowing the hot air to flow to

the outside.

• Should the foam strip(s) be

too large, cut off the extra

part to fit the window.

•Minimum distance from the

wall should be 50cm.

OFF

Foam

strips

Adaptor

50cm

Dimplex DAC12005_9005.qxd 7/5/05 3:34 PM Page 5

Downloaded from www.Manualslib.com manuals search engine