Technical data

Scope of Delivery
A Class HP Installation and User Instructions R02583-2 09/13 Page 7
2 Introduction
Thank you for choosing a Dimplex
product. The EC-Eau heat pump
cylinders are specified with large, high
surface area heat exchangers,
specifically sized to match the
requirements of Dimplex “A” Class Heat
Pumps. They boast 60mm of low GWP
insulation foam, together with 100%
recyclable stainless steel inner
components and a sleek black, hard
wearing outer shell manufactured from
completely recycled materials.
For more detailed information on product
features, please see the Technical Data
section in this manual.
3 Scope of delivery
Please ensure you check the scope of delivery
below before signing any delivery
documentation. Claims for missing or
damaged parts after signing for the delivery
will not be accepted.
Table 1: Scope of Delivery for A Class Heat Pump Cylinders
* These items are supplied factory fitted
** Supplied with Dimplex heat pump hydraulic pack
150/40 l and 210/40 l 250/40 l and 250HPST / 40l
 
1/2”, 7bar/90°C 1/2”, 7bar/90°C
 
 
 
 
 
 
 
 
19 l 24 l
15mm/22mm 15mm/22mm
 
 
 
- in line strainer

- balanced co ld water supply port
- 22mm co nnection for expansion vessel

- 3 bar PRV
- 6 bar ERV
- non-return valve
28mm motorised three port valve **
Scope of delivery
T+P valve *
Cylinder nominal volume
Cylinder with two 3kW immersions *
Terms and conditions x 1
Inlet control group consisting of:-
Expansion vessel with fixing kit and
connection hose
Tundish
Installation & User Instructions x 1
Cable ties x 10
15mm Manual Bleed Valve
28mm Pump Union assembly x 2
1/2" BSP M Drain Valve
28mm S Bend C U Pipe
28mm C U Straight Pipe
28mm x 90 Pipe
28mm C ompression Tee x 2