User's Manual

15
• Advanced Settings
In this section, the following settings can be executed:
- Security Notifications Settings: it allows to setup notification language and duress alarm, which allows users
to input pre-set duress code on the keypad to stop alarm and meanwhile send pre-set emergency messages to
other designated contacts.
- Ready to Arm: if this feature is enabled, when arm or home arm the premises, the system will notify if there is
a contact sensor is in open status.
- Entry Delay: users can select which sensors should be held for transmitting alarm signals for preset time.
- Exit Delay: by enabling this, the system will wait for the preset time before responding to ARM or HOME ARM
instructions.
- Siren Duration: it defines how long the built-in siren should sound in event of alarm activation.
- Network & Password Settings: it allows to reset the network parameters and the system password.
- Arm/Disarm Indication: it allows to turn on/o the sound of indication
- Select Time zone: manually select appropriate time zone.
• App Settings
In this section, the following settings can be executed:
- Change App Language: it supports multi-languages which can be easily switched in App.
- Passcode Lock: by enabling this feature, you will be asked to enter the passcode every time when App is
activated from the background. For iPhone, the Touch-ID feature is also supported.
- Help & Feedbacks: users can watch some tutorials online and send feedbacks to customer service directly in
App.