User's Manual

7
Standard SIM
card adapter
Nano-SIM
Micro-SIM
Setup
• Internet Connection Requirements
- Please ensure the router you are using has already been connected to the Internet with DHCP mode enabled. Nova Pro supports IPV4
protocol only.
- The system supports the following types of connection:
- LAN: 10/100M Ethernet.
- Wi-Fi: 2.4GHz, WEP/WPA/WPA2 encrypted.
• Place the Panel at a Suitable Place
- If Wi-Fi is used to connect the panel to internet, please make sure the panel is placed under Wi-Fi coverage before installation. (It is
recommended to use your phone to help verify the Wi-Fi coverage at the spot.
• Install the SIM Card (Optional)
- Insert a standard SIM card. Please place the Nano-SIM or Micro-SIM to a card adapter for installation.
• Get Ready for Setup
- Download the “Nova Pro” APP from either iOS APP Store or Google Play by searching “Nova Pro”, or scan the
QR code below with your mobile phone.
- Please open the lid on the back of the device, and turn on the power button. The indicator on the panel will
flash and a er approximately 45 seconds a beep sound should occur indicating the device being activated.
Make sure the Bluetooth is activated on your phone and place the panel close to 2.4GHz Wi-Fi signal.