Datasheet

ManualsBrandsDiodes Incorporated ManualsDriversMOSFET Driver, SOT-26, 40V

ZXGD3006E6

Document Number DS35229 Rev. 4 - 2

1 of 8

www.diodes.com

June 2013

Product Line o

Diodes Incorporated

ZXGD3006E6

40V 10A GATE DRIVER IN SOT26

Description

ZXGD3006E6 is a 40V Gate Driver for switching IGBTs and SiC

MOSFETs. It can transfer up to 10A peak source/sink current into the

gate for effective charging and discharging of a large capacitive load.

The ZXGD3006E6 can drive typically 4A into the low gate impedance

of an IGBT, with just 1mA input from a controller. Also, the turn-on

and turn-off switching behavior of the IGBT can be individually tailored

to suit an application. In particular, by defining the switching

characteristics appropriately, EMI and cross conduction problems can

be reduced.

Applications

Gate driving IGBTs and SiC MOSFETs in:

 DC-DC Converters in Electric Cars

 Automotive Active Suspension Systems

 Solar Inverters

 Power Supplies

 Plasma Display Panel Power Modules

Features

 High-gain buffer with typically 4A output from 1mA input

 40V supply for +20V to -18V gate driving to prevent dV/dt

induced false triggering

 Emitter-follower that is rugged to latch-up / shoot-through

issues, and delivers <10ns propagation delay time

 Separate source and sink outputs for independent control of

IGBT turn-on and turn-off times

 Optimized pin-out to simplify PCB layout and reduce parasitic

trace inductances

 Near-zero quiescent supply current

 Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)

 Halogen and Antimony free. “Green” Device (Note 3)

 Qualified to AEC-Q101 Standards for High Reliability

 PPAP capable (Note 4)

Mechanical Data

 Case: SOT26

 Case material: molded plastic. “Green” molding compound.

 UL Flammability Rating 94V-0

 Moisture Sensitivity: Level 1 per J-STD-020

 Terminals: Finish - Matte Tin Plated Leads, Solderable per

MIL-STD-202, Method 208

 Weight: 0.018 grams (approximate)

Ordering Information (Notes 4 & 5)

Product Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel

ZXGD3006E6TA AEC-Q101 3006 7 8 3,000

ZXGD3006E6QTA Automotive 3006 7 8 3,000

Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.

2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen and Antimony free, "Green"

and Lead-Free.

3. Halogen and Antimony free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)

and <1000ppm antimony compounds.

4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally

the same, except where specified.

5. For packaging details, go to our website at http://www.diodes.com/products/packages.html.

Marking Information

Pin Name Pin Function

Supply Voltage High

IN Driver Input Pin

Supply Voltage Low

SOURCE Source Current Output

SINK Sink Current Output

3006 = Product Type Marking Code

SOT26

Top View

Pin-Out

Source

Do Not Connect

Sink

3006

Top View

Internal Device

Schematic

Summary of content (8 pages)

PAGE 1
A Product Line of Diodes Incorporated ZXGD3006E6 40V 10A GATE DRIVER IN SOT26 Description Features ZXGD3006E6 is a 40V Gate Driver for switching IGBTs and SiC  MOSFETs. It can transfer up to 10A peak source/sink current into the  gate for effective charging and discharging of a large capacitive load.
PAGE 2
A Product Line of Diodes Incorporated ZXGD3006E6 Typical Application Circuit VS VCC + supply Controller VCC SOURCE RSOURCE IN ZXGD3006 IGBT (or SiC MOSFET) SINK RSINK VEE VEE - supply Maximum Ratings (@TA = +25°C, unless otherwise specified.) Characteristic Supply voltage, with respect to VEE Input voltage, with respect to VEE Symbol Value Unit VCC 40 V VIN 40 V V(source-sink) ±7.5 V Peak output current IPK ±10 A Input current IIN ±100 mA Value 1.1 8.
PAGE 3
A Product Line of Diodes Incorporated ZXGD3006E6 Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Symbol Min Typ Max Output voltage, high Characteristic VOUT(hi) VCC - 1.0 VCC - 0.8 — Output voltage, low VOUT(low) — VEE + 0.12 VEE + 0.3 Supply breakdown voltage BVCC Quiescent supply current Sink current Source current with varying input resistances — — — — — — 50 — — 50 I(source) — 4.0 — I(sink) — 3.
PAGE 4
A Product Line of Diodes Incorporated ZXGD3006E6 Typical Switching Characteristics (@TA = +25°C, unless otherwise specified.) VIN = 0 to 15V 15 VIN = 0 to 15V 15 VCC= 15V VCC= 15V VEE= 0V RIN = 1k 10 CL = 10nF VOUT RL = 0.18 RSOURCE= 0 5 RSINK = 0 VIN Voltage (V) Voltage (V) VEE= 0V RIN = 1k 10 CL = 100nF VOUT RL = 0.18 RSOURCE= 0 5 RSINK = 0 VIN 0 0 0 0.0 100 200 300 400 500 600 700 800 Time (ns) 0.5 1.0 1.5 2.0 2.5 Time (s) 3.0 3.
PAGE 5
A Product Line of Diodes Incorporated ZXGD3006E6 Typical Switching Characteristics (@TA = +25°C, unless otherwise specified.) 10 Peak Sink Current (A) Peak Source Current (A) 10 CL=1uF 1 CL=100nF VIN = 15V 0.1 CL=10nF VCC= 15V VEE= 0V RL = 0.18 CL=1nF 0.01 1k 10k 100k 1M CL=100nF RL = 0.18 1k 1M 10M Sink Current vs.
PAGE 6
A Product Line of Diodes Incorporated ZXGD3006E6 Circuit Examples ZXGD3006 driving a MOSFET ZXGD3006 driving an IGBT Application example of ZXGD3006 driving the gate of an IGBT with independent ton and toff using asymmetric RSOURCE and RSINK In addition, the gate is driven negative to -18V to prevent dV/dt induced false triggering.
PAGE 7
A Product Line of Diodes Incorporated ZXGD3006E6 Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. A SOT26 Dim Min Max Typ A 0.35 0.50 0.38 B 1.50 1.70 1.60 C 2.70 3.00 2.80 D   0.95 H 2.90 3.10 3.00 J 0.013 0.10 0.05 K 1.00 1.30 1.10 L 0.35 0.55 0.40 M 0.10 0.20 0.15 0° 8°   All Dimensions in mm B C H K M J L D Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
PAGE 8
A Product Line of Diodes Incorporated ZXGD3006E6 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).