User manual

136 Bio-inert Quaternary Pump User Manual

9 Maintenance

Replacing the Module’s Firmware

To upgrade/downgrade the module’s firmware carry out the following

steps:

1 Download the required module firmware, the latest LAN/RS-232 FW

Update Tool and the documentation from the Agilent web.

• http://www.chem.agilent.com/scripts/cag_firmware.asp.

2 For loading the firmware into the module follow the instructions in the

documentation.

Module Specific Information

There is no specific information for this module.

When The installation of newer firmware might be necessary

• if a newer version solves problems of older versions or

• to keep all systems on the same (validated) revision.

The installation of older firmware might be necessary

• to keep all systems on the same (validated) revision or

• if a new module with newer firmware is added to a system or

• if third part control software requires a special version.

Tools required Description

LAN/RS-232 Firmware Update Tool

OR Agilent Diagnostic Software

OR Instant Pilot G4208A

Parts required # Description

1 Firmware, tools and documentation from Agilent web site

Preparations Read update documentation provided with the Firmware Update Tool.