User manual

132 1260 Nanoflow Pump User Manual
9 Maintenance
Cleaning the Module
Cleaning the Module
The module case should be kept clean. Cleaning should be done with a soft
cloth slightly dampened with water or a solution of water and mild detergent.
Do not use an excessively damp cloth as liquid may drip into the module.
WARNING
Liquid dripping into the electronic compartment of your module.
Liquid in the module electronics can cause shock hazard and damage the module.
➔ Do not use an excessively damp cloth during cleaning.
➔ Drain all solvent lines before opening any fittings.