User manual

18 1260 Nanoflow Pump User Manual

1 Introduction to the 1260 Infinity Nanoflow Pump

Electrical Connections

• The CAN bus is a serial bus with high speed data transfer. The two

connectors for the CAN bus are used for internal module data transfer and

synchronization.

• One analog output provides signals for integrators or data handling

systems.

• The REMOTE connector may be used in combination with other analytical

instruments from Agilent Technologies if you want to use features such as

start, stop, common shut down, prepare, and so on.

• With the appropriate software, the RS-232C connector may be used to

control the module from a computer through a RS-232C connection. This

connector is activated and can be configured with the configuration switch.

• The power input socket accepts a line voltage of 100 – 240 VAC ± 10 % with a

line frequency of 50 or 60 Hz. Maximum power consumption varies by

module. There is no voltage selector on your module because the power

supply has wide-ranging capability. There are no externally accessible

fuses, because automatic electronic fuses are implemented in the power

supply.

Serial Number Information (ALL)

The serial number information on the instrument labels provide the following

information:

NOTE

Never use cables other than the ones supplied by Agilent Technologies to ensure proper

functionality and compliance with safety or EMC regulations.

CCXZZ00000 Format

CC Country of manufacturing (DE Germany)

X Alphabetic character A-Z (used by manufacturing)

ZZ Alpha-numeric code 0-9, A-Z, where each combination

unambiguously denotes a module (there can be more than one

code for the same module)

00000 Serial number