User manual

1260 Nanoflow Pump User Manual 29

Introduction to the 1260 Infinity Nanoflow Pump

Setting the 8-bit Configuration Switch (On-Board LAN)

Communication Settings for RS-232C

The communication protocol used in the column compartment supports only

hardware handshake (CTS/RTR).

Switches 1 in down and 2 in up position define that the RS-232C parameters

will be changed. Once the change has been completed, the column instrument

must be powered up again in order to store the values in the non-volatile

memory.

Use the following tables for selecting the setting which you want to use for

RS-232C communication. The number 0 means that the switch is down and 1

means that the switch is up.

Tabl e 6 8-bit Configuration Switch (without on-board LAN)

Mode Select12345678

RS-232C 0 1 Baudrate Data

Bits

Parity

Reserved 1 0 Reserved

TEST/BOOT 1 1 RSVD SYS RSVD RSVD FC

NOTE

The LAN settings are done on the LAN Interface Card G1369A/B. Refer to the

documentation provided with the card.

Tabl e 7 Communication Settings for RS-232C Communication (without on-board LAN)

Mode

Select

12345 6 78

RS-232C 0 1 Baudrate Data Bits Parity