User manual
50 1260 Nanoflow Pump User Manual
3 Installing the Module
Installing the Pump
1 Place the module on the bench in a horizontal position.
2 Ensure the power switch at the front of the module is OFF (switch stands
out).
Figure 12 Front View of the Module
3 At the rear of the module move the security lever to its maximum right
position.
4 Connect the power cable to the power connector at the rear of the module.
The security lever will prevent that the cover is opened while the power
cord is connected to the module.
HZg^VacjbWZg
HiVijhaVbe
EdlZghl^iX]