Replacement Part List

Operation Precautions

is generator is not intended to power sensitive electronic

equipment* without the addition of an appropriate line

conditioner and surge protector (both not included).

Sensitive electronic equipment, including but not limited

to audio/video equipment, television sets, computers, and

printers, should be operated on approved inverter type

generators or pure sine wave generators. If the plugged in

product operates abnormally or unusually slow, immediately

stop using the generator as a power source.

1. Before connecting an appliance or power cord to the

generator make sure that it is in good working order.

Faulty appliances or power cords can create a potential for

electrical shock.

2. If an appliance begins to operate abnormally, becomes

sluggish or stops suddenly, turn it oﬀ immediately.

Disconnect the appliance, and determine whether the

problem is the appliance, or if the rated load capacity of the

generator has been exceeded.

3. Make sure that the electrical rating of the tool or appliance

does not exceed that of the generator. Never exceed the

maximum power rating of the generator. Power levels

between rated and maximum may be used for no more

than 30 minutes.

4. Substantial overloading will open the circuit breaker.

Exceeding the time limit for maximum power operation

or slightly overloading the generator may not switch the

circuit breaker OFF, but will shorten the service life of the

generator.

5. Connect the generator only to an electrical system (120V~)

that is compatible with the electrical characteristics and

rated capacities of the generator.

6. Set up the generator outdoors in a well-ventilated, dry area,

away from building air intakes. e generator should be

protected from direct exposure to rain and snow. Do not

set up the generator on a conductive surface such as a metal

deck.

CAUTION