- Dish Networks Receiver User Guide

Page 30
Chapter 3
Using the System
EVENT TIMER FREQUENCIES
Once Applies to a one-time program. If the program time changes, this
timer operates at the new time. The receiver deletes this timer when the
timer operates.
Mon.-Fri. - Applies to a program that is scheduled for Monday through
Friday on the same channel at the same time each day.
Daily - Applies to a program that is scheduled for Monday through Sunday
on the same channel at the same time each day.
Weekly - Applies to a program that is scheduled for once a week on the
same channel at the same time on the same day.
Note: You can record only the program to which the receiver is tuned. If
you open any menu (including the Program Guide) while recording a
program on videotape, the menu also will be recorded. If a program time
changes by more than 24 hours, the timer will not operate.
BEFORE AN EVENT TIMER OPERATES
Five minutes before an event timer operates, the receiver displays a small
blinking clock” symbol on the TV screen. This symbol disappears when
the program begins. While the symbol is displayed, you may do either one
of the following.
Press the remote control CANCEL button to clear the
symbol from the TV screen. This does not affect the timer;
it will operate.
Press the remote control INFO button to see more
information on the event timer. If you do this, you will
have the following choices:
Select the
OK or Cancel option to continue with the
event timer.
Select the
Stop Timer or No option to stop the event timer.
Note: This stops only this instance of a Mon.-Fri., Daily or Weekly timer.
The timer will operate the next time it is scheduled. To stop all operations of
such a timer, you must delete the timer. For a Reminder Event Timer, instead
of having the option to stop the timer, you have the option to tune to the
program.
Or
Or