Data Sheet

DITEK’s 2MHTP voice surge protectors
provide robust protection in a compact
package. Designed for ease of installation,
with convenient field-replaceable modules,
the 2MHTP protects two telco circuit pairs
per module.
Modular Voice Line Surge Protection
General Product Specifications
DTK-2MHTP
Selection Guide
DTK-2MHTP
DTK-2MHTPWB (with mounting base)
DTK-MB10: Hardwire Mounting Base
DTK-2MHTP
Application Features
• Hybrid design delivers high peak surge current
capacity and reliable voltage clamping for peak
protection
• H
ard-wire mounting base
• F
ield replaceable, hot swappable, modular edge
card connection design
• D
esigned to protect 130V voice/data circuits
• T
wo pairs protected per module; when used
with mounting base (DTK-MB10) modules can
be ganged to protect up to ten pairs with a
common ground
Product Features
Agency Approvals: UL497A
Connection Method – Module: Plug into 10 position
edge card base
Connection Method – Base: 12 AWG stranded wire
maximum screw terminals
Continuous Current: 150mA
Max Surge Current: 14,000 A (8/20 μs impulse)
Protection Mode: L-G (All)
Response Time: ≤ 5 nanoseconds
MCOV: 130 VDC
Typical Clamp: 200 VDC
Dimensions
– Module: 2.1” x 1.6” x 1.0”
(53mm x 41mm x 25mm)
– Module with Base: 4.5” x 1.75” x 3.00”
(114mm x 45mm x 76mm)
Weight: .6 oz (18g) without base; 1.2 oz (36g) with base
Housing: ABS
Warranty: Ten Year Limited Warranty
One DITEK Center
1720 Starkey Road
Largo, FL 33771
800-753-2345
Technical Support: 1-888-472-6100
www.ditekcorp.com
Doc. Number: SPS-100011-001 Rev 6 06-13
©2013 DITEK Corp.
Specification Subject to Change