User`s manual

Biaxial Displacement Follower User’s Manual Version 1.4, April 19, 2004 IM1013
Page
13
Figure 14
Biaxial Targets
The 5600 can track two edges simultaneously. These edges should be perpendicular to one another, and they must share a
common vertex or curved surface. See Figures 15 and 16.
Figure 15
With the controls set for biaxial mode and using a light center target, and the target phase switches it to light over dark with
light to the right, the systems will lock-on to the edges as shown in Figure 15. As the target phase switches are selected,