User`s manual

Biaxial Displacement Follower User’s Manual Version 1.4, April 19, 2004 IM1013
Page
2
System Assembly
1 Inspect the equipment for damage that might have occurred during shipment. If you find any damage, notify the
shipping company immediately.
2 Attach the interconnecting cable from the control unit to the optical head and secure with the lock ring.
3 Attach the lens systems to the optical head. The lens screws into the extension barrel, and the extension barrel
screws into the head. The thread system in the head is a standard Leica, 39mm diameter. Note that the 105mm lens
comes attached to the 72mm extension tube. The 72mm extension is factory set and should come set to the correct
length.
4 Connect the control unit to a 100-120 volt, 50-60 Hz power source.