Instructions / Assembly

DiversiTech introduces the ultimate in drain pan
design — the seamless, nestable, metal
drain pan with rolled edges.
70 DiversiTech drain pans fit in the same space
as 6 conventional 2” deep non-nesting
drain pans!
Metal Drain Pan
DiversiTech’s Metal Drain Pan is a seamless, nestable,
metal drain pan with rolled edges. The ultimate in drain
pan design, tailored for easy distribution and installation.
The Seamless Metal Drain Pan is full of thoughtful features
to make life easier on both the distributor and the
contractor. The stout metal construction is backed up by
rolled edges on all sides without any seams for maximum
safety and integrity. These pans are nestable as well — a
stack of 70 pans is only a foot high!
Once at the site, there are no worries of having to return to the distributor for missing parts.
The fittings are conveniently packaged with the pan for simple and efficient installation.
Choose between two possible drain outlet positions and install with confidence.
6-M2748 26 Gauge Metal Drain Pan – 27” x 48” 5
6-M2763 26 Gauge Metal Drain Pan – 27” x 63” 5
6-M3030 26 Gauge Metal Drain Pan – 30” x 30” 5
6-M3050 26 Gauge Metal Drain Pan – 30” x 50” 5
6-M3060 26 Gauge Metal Drain Pan – 30” x 60” 5
6-M3263 26 Gauge Metal Drain Pan – 32” x 63” 5
CATALOG NO. DESCRIPTION STANDARD PACK
6-M2748
Seamless
The seamless design of DiversiTech metal drain
pans virtually eliminates leaks from seams and
folded corners found in conventional metal drain
pans.
Nestable
Because DiversiTech drain pans are nestable, there
is a tremendous decrease in volume needed to store
and transport metal drain pans. A stack of seventy
DiversiTech metal drain pans is only 12” high. There-
fore, seventy DiversiTech pans fit in the same space
as six conventional 2” deep non-nesting drain pans!
Single Piece Design
The DiversiTech metal drain pan is stamped from
a single sheet of 26 gauge galvanized steel which
prevents leaks.
Rolled Edge
The rolled edge virtually eliminates hand injuries dur-
ing handling.
Two Outlets
Easy, flexible installation with an outlet on both the
long and short side of the pan — no need to cut an
outlet if you have the wrong pan on the job.
Fittings Included
Get everything you need for the installation of the
pan in a single package. Fittings are included with
DiversiTech metal drain pans.
FEATURES
BENEFITS
A stack of
70 DiversiTech
metal drain pans
is only
12” high!
800.995.2222
26
27
www.diversitech.com
Metal Drain Pan