User's Manual

18
©
2017 DJI All Rights Reserved.
Spark
User Manual
2. In DJI GO 4, tap to bring up the ight modes and select ActiveTrack.
3. Tap on the subject you want to track then tap to confirm your selection. If the subject is not
automatically recognized, drag a box around it. The box will turn green when tracking is in progress. If
the box turns red, the object could not be identied and you should try again.
4. The aircraft will automatically avoid obstacles in its ight path. If the aircraft loses track of the subject,
because it is moving too fast or is obscured, re-select the subject to resume tracking.
1.5 m
S 1.1D 9.6
H 9.6
61%
P-GPS
12
09:29
2.4G
In-Flight（GPS）
1080P/30
61%
ActiveTrack
12
09:29
GO
2.4G
In-Flight（GPS）
1080P/30
Using ActiveTrack
Ensure the Intelligent Flight Battery is fully charged and the aircraft is in P Mode. Follow the steps below
to use ActiveTrack:
1. Take off and hover at least 4.5 ft (1.5 m) above ground.