Owner's Manual

DJI RSC 2

User Manual

Auto Tune: press the side dial to select Auto Tune after balancing the gimbal. If the

lens-fastening strap is installed, users can enable SuperSmooth prior to auto tune for

optimal performance. SuperSmooth will take effect after auto tune completed. The

stiffness can be adjusted on the auto tune screen.

Follow Mode Settings: tap to select follow mode and speed. The tilt motor controls the

tilt axis to follow, pan motor controls the pan axis to follow, and roll motor controls the

roll axis to follow.

Follow Mode

PF: pan follow, where only the pan axis follows the movement of the grip.

PTF: pan and tilt follow, where both the pan and tilt axes follow the movement of the grip.

FPV: pan, tilt, and roll follow, where all three axes follow the movement of the grip.

3D Roll 360: enable to shoot footage while rotating the camera 360°.

Portrait: enable to shoot in portrait mode.

Custom: enable or disable any axis follow as required.

Follow Speed

Select the follow speed. Users can choose fast, medium, slow, and custom.

Joystick Settings: including Joystick Speed and Smoothing settings.

Joystick Speed: allows users to control the speed of the joystick for the gimbal. Users

can choose fast, medium, slow, and custom.

Joystick Smoothing: allows users to control the sensitivity of the gimbal. The lower the

smoothing value, the more sensitive the movement of the gimbal.

Front Dial Settings: including Dial Function and Speed settings.

Dial Functions: allows users to set the function of the front dial. Users can choose to

control the focus motor, focus, ISO, aperture, and roll axis.

Dial Speed: allows users to set the response speed of the function set for the front

dial.

Advanced Settings

Silent Mode: enable to turn off sounds including the warning tone.

 DisableSele: prevents accidentally entering sele mode and interrupting recording.

If disabled, Sele mode will not be entered if the trigger is pressed three times.

Horiz Calibration: use if the gimbal is unlevel when the gimbal is steady. If the issue

persists, use Tune Manually.

Gimbal Auto Check: tap to analyze and output the status information of the gimbal.

Push Mode: enable to manually control the tilt and pan axis.

More: tap to restore the gimbal parameters and Bluetooth password to default

settings, choose the onscreen language from English and Chinese (Simplied), and

view the device information and rmware version.