Owner's Manual

DJI RSC 2

User Manual

Updating Firmware

Update the rmware using the Ronin app. An on-screen alert will be received when new

rmware is available. Follow the on-screen instructions to update the rmware.

Briefcase Mode

Flashlight Mode

Briefcase mode: when DJI RSC 2 is powered on and working in Upright mode, loosen the

lock knob of the gimbal, adjust to the lower position, and tighten the lock knob. Briefcase

mode is enabled after pressing the trigger twice. When DJI RSC 2 is powered off, loosen

the lock knob of the gimbal, adjust to the lower position, and tighten the lock knob.

Briefcase mode is enabled after powering on the gimbal.

Flashlight mode: Flashlight mode is enabled after tilting the gimbal forward 90° from

Upright mode.

3D Roll 360 is available when using DJI RSC 2 in Flashlight mode. The slip-ring on the

pan axis enables DJI RSC 2 to perform a continuous roll rotation.

Press the M button three times to enter or exit 3D Roll 360 or go to User Prole in the

Ronin app to enable or disable 3D Roll 360. Push the joystick to the left or right to begin

3D Roll 360. Push the joystick to the left or right twice in quick succession to trigger auto

rotation.

During auto rotation: when the grip is horizontal, press the trigger twice and the camera

will stop in an upright position. Press the trigger three times and the camera will stop

in an upside-down position. When the grip is vertical, press the trigger twice and the

camera will stop at a pan axis angle of 0° with the lens pointing upward. Press the trigger

three times and the camera will stop at a pan axis angle of 180° degree with lens pointing

upward.

Set the Max Speed and Smoothing for the 3D Roll 360 in the Control settings under the

User Profile of the Ronin app. Note that Speed and Deadband are unavailable when

using 3D Roll 360.