Owner's Manual

DJI RSC 2

Quick Start Guide

F. Powering On/O and Entering/Exiting Sleep Mode

Press and hold the power button to turn DJI RSC 2 on or o. Tap or press twice to enter

or exit sleep mode.

G. Activating DJI RSC 2

DJI RSC 2 needs to be activated through the Ronin app before using

for the rst time.

1. Press and hold the power button to power on the gimbal.

2. Enable Bluetooth on your mobile device and launch the Ronin app.

Note that a DJI account is required to launch the Ronin app. Once

detected in the list of Bluetooth devices, select DJI RSC 2 and input

the default Bluetooth password: 12345678. Make sure you are

connected to the internet and follow the on-screen instructions to

activate DJI RSC 2.

Mounting the Camera

Make sure to prepare the camera before mounting it to DJI RSC 2. Remove the lens cap and

check that the battery and memory card are inserted in the camera. Make sure DJI RSC 2 is

powered o or in sleep mode before mounting the camera.

1. Attach the Upper Quick-Release Plate

The camera lens and the arrow on the bottom of the upper quick-release plate must face

the same direction. Attach the upper quick-release plate to the camera by tightening the

screw.

A camera riser is required when using a focus motor or a small camera with a large lens, such as a

Sony A6400 with the Sony FE 24-70 f2.8 GM lens.

DJI RSC 2

Creat

User Proﬁle

Status

Device Activation

Activation is required prior to using the

device. To do so, information regarding

your device and DJI account will be

uploaded to DJI. Please agree and

proceed to activation.

Agree and activate