User manual

18
©
2018 DJI All Rights Reserved.
MATRICE 200 User Manual
Follow the steps below to use the Vision System:
1. Ensure the aircraft is in P-mode and place the aircraft on a at surface. Note that
the Vision System cannot work properly on surfaces without clear pattern varia-
tions.
2. Turn on the aircraft. The aircraft will hover in place after takeoff. The aircraft sta-
tus indicators will ash green twice, which indicates the Vision System is work-
ing. Gently push the left stick up to lift off and the aircraft will hover in place.
Assisted Braking from Obstacle Sensing
Powered by the Forward Vision System, the aircraft is able to actively brake when obstacles are
detected in front. Obstacle Sensing works best when lighting is adequate and the obstacle is
clearly textured. The aircraft must y at no more than 31 mph (50 kph) to allow for sufcient braking
distance.
ON OFF
Auto Hold
Using Infrared Sensing System
The Infrared Sensing System can only be used to avoid large, diffuse, and reflective obstacles
(reectivity >10%). Please be mindful of blind spots (Grey) of the Infrared Sensing System.