User manual

28
©
2018 DJI All Rights Reserved.
MATRICE 200 User Manual
DO NOT select an area with people, animals, small or ne objects (e.g. trees and power lines),
or transparent objects (e.g. glass or water).
Stay clear of obstacles near the ight path, particularly when the aircraft is ying backward.
Be extra vigilant when using ActiveTrack in any of the following situations:
a) The tracked subject is not moving on a level plane.
b) The tracked subject changes shape drastically while moving.
c) The tracked subject could be blocked or out of sight for a long time.
d) The tracked subject is moving on a snowy surface.
e) Available light is too low (< 300 lux) or too high (> 10,000 lux).
f) The tracked subject has a similar color or pattern as its surrounding environment.
You must follow local privacy laws and regulations when using ActiveTrack.
Aircraft will not be able to avoid obstacles while in Prole or Spotlight Mode. Use these modes
in open areas.
Exiting ActiveTrack
Use the following methods to exit ActiveTrack:
1. Tap the “
” button on the screen.
2. Press the Intelligent Flight Pause button on the remote controller.
After exiting ActiveTrack, the aircraft will hover in place, at which point you may choose to fly
manually, track another subject, or return to home.
Tripod Mode
Tap the icon in DJI GO 4 to enable Tripod Mode. Tripod Mode reduces the Matrice 200’s maximum
speed (this can be adjusted in DJI GO 4 app), and the control stick sensitivity of the remote
controller is dulled to give you the precision you need for accurate framing. Tripod Mode allow the
Matrice 200 to be used as a rocker arm or slide rail, shooting smoother, more stable footage.
Only use Tripod mode when GPS signal is strong or in ideal light conditions for the Vision
System. If GPS signal is lost and the Vision System does not function, it will automatically
switch to ATTI mode. In this case, ight speed will increase and the aircraft will not hover in
place. Use Tripod mode carefully.
Spotlight Pro
Spotlight Pro is a powerful new tracking mode that allows a single pilot to capture complex,
dramatic images. The gimbal will automatically adjust to keep the camera pointing at the subject.
Lock onto a subject in Spotlight Pro mode and the gimbal will capture the locked subject regardless
of the directions that the aircraft ies.
Quick Mode: Use your nger to draw a square around the object in to begin tracking.
Composition Mode: Use your nger to draw a square. When the subject enters the square, press
the C2 button to begin tracking. Press the C2 button again to stop tracking.
In Free mode, you can control the aircraft’s heading independently of the camera.
In Follow mode, the aircraft heading will be the same as that of the camera.
OR