User manual

©
2018 DJI All Rights Reserved.
31
MATRICE 200 User Manual
[3]
[1]
[2]
[8]
[6]
[5]
[4]
[7]
[1] Power Port
[2] Charging Port
[3] Charging Port Cover
[4] Battery Charging Level Indicators
[5] Cover/Battery Release Button
[6] Status LEDs
[7] Firmware Update Port (Micro USB)
[8] Buzzer Switch
Overview
LED1
LED3
LED2
LED4
Battery Level Button
* It will take approximately 1.5 hours to fully charge the Matrice 200 Intelligent Flight Battery, and 3 hours for the
remote controller. It will take a longer time to charge the Intelligent Flight Battery and remote controller together.
Connecting Batteries
Press the release button and open the corresponding charging port cover. Insert the Intelligent
Flight Battery into the charging port to begin charging. The battery pair with more stored power
will be charged rst. The Charging Hub will intelligently charge batteries in sequence according to
battery power levels from high to low, if batteries are not paired. Pairing can be carried out using the
DJI GO 4 app. Refer to the "Status LED Description” section for more information about Status LED
blinking patterns. The buzzer will begin beeping when charging is complete. Refer to the “Buzzer
Beeping Description” for more information about buzzer beeping patterns.
Connecting to a Power Source
Connect the standard Matrice 200 Battery Charger to a power outlet (100-240 V, 50/60 Hz), then
uncover the rubber cover on the power port to connect the Charging Hub to the Matrice 200 Battery
Charger*.
Power OutletChargerCharging Hub