User manual

©
2018 DJI All Rights Reserved.
43
MATRICE 200 User Manual
Optimal Transmission Range
The transmission signal between the aircraft and the remote controller is most reliable when the
antennas are positioned in relation to the aircraft as depicted below:
Ensure the aircraft is ying within the optimal transmission zone. To maintain optimal transmission
performance, adjust the remote controller and antennas according to the above diagram. The posi-
tion of the antennas required for optimal transmission range varies in the frequency of 5.8 GHz and
2.4 GHz. Please place the antennas based on the actual operating frequency.
Dual Remote Controller Mode
More than one remote controller can connect to the same aircraft in Dual Remote Controller mode.
The primary remote controller operator controls the orientation of the aircraft, while the secondary
remote controller controls the movement of the gimbal and camera operation. Primary and secondary
remote controllers communicate each other via Wi-Fi.
Optimal Transmission RangeOptimal Transmission Range
1
3
2
5.8 GHz
90° 60°
2.4 GHz
Strong Weak
Connecting Your Mobile Device
Tilt the Mobile Device Holder to the desired position. Press the button on the side of the Mobile Device Holder
to release the clamp, then place your mobile device into the clamp. Adjust the clamp to secure your mobile
device. Connect your mobile device to the remote controller with a USB cable. Plug one end of the cable into
your mobile device and the other end into the USB port on the back of the remote controller.