User manual

Table Of Contents

MATRICE 200

User Manual

In Dual Controller Mode, when the primary remote controller is primary, it can control

gimbal pitch and pan. When the secondary remote controller is primary, it can control

gimbal pitch, pan, and roll.

Dual Remote Controller mode is not available in Russia and Israel.

Setting Up Dual Remote Controller Mode

Dual Remote Controller mode is disabled by default. Users must enable this feature on the primary

remote controller via DJI GO 4. Follow the steps below to setup:

Primary Remote Controller:

1. Connect the remote controller to your mobile device and launch DJI GO 4.

2. Go to the Camera View and tap

to enter the remote controller settings window.

3. Select primary and set the remote controller as the primary remote controller.

4. Enter the connection password for the secondary remote controller.

Primary

Primary ID: 28172d Secondary ID: 14f93f

Connection Status:ON Authorization Code:

Set Remote Controller Status

Primary and Secondary

Remote Controller Calibration

666666

Remote Controller Settings

Secondary

OFF

When in secondary, the remote controller cannot link to the aircraft nor control aircraft

orientation. Select primary in DJI GO 4 if you wish to connect and control the aircraft with

the remote controller.

“Secondary” Remote Controller:

1. Select secondary to set the remote controller to secondary.

Search Primary