User manual
Table Of Contents
©
2018 DJI All Rights Reserved.
47
MATRICE 200
User Manual
A secondary remote controller cannot link to the aircraft and so therefore cannot control
the orientation of the aircraft. Select primary in DJI GO 4 if you wish to link a remote
controller it to the aircraft.
A remote controller will disconnect from the linked aircraft if a new remote controller is
linked to the same aircraft.
Press the C1 and C2 buttons and the Start/Stop button for fast linking.
4. The remote controller is ready to link. The Remote Controller Status Indicator blinks blue, and a
“beep” sound is emitted.
5. Locate the Linking button on the aircraft, as shown in the gure shown below. Press the Linking
button to start linking. The Remote Controller Status Indicator will display solid green if the con-
nection is successful.