Use and Care Manual

10 | EVST9022 man. v.201130
ENGLISH
PLOW ASSEMBLY
INSTALLATION STEPS
STEP 17:Ensure all hardware and hose fittings are tightened - do not
over-tighten components that could restrict movement.
STEP 18:Fill pump tank with one quart of provided hyraulic Automatic
Transmission Fluid (ATF) to fill line.
STEP 19:Install custom mount and cross bar to vehicle. Please follow the
instructions included in your mount kit. Fit in place with all
fasteners (finger tight) then proceed to tighten with appropriate
tools.
STEP 20:Install wiring harness to vehicle battery.
CAUTION: Always exercise caution when using hand tools around the
battery! A solid conductor such as a metal wrench can cause severe injury,
fire, or even cause the battery to explode!
•Attach the short lead on the breaker to the positive “+”
terminal of the battery.