Use and Care Manual

8 | EVST9022 man. v.201130
ENGLISH
PLOW ASSEMBLY
NOTE: Tools needed - adjustable wrench, vise grips, socket set 11/16”, 5/8”, 3/4”, 1-11/16”.
STEP 1:Open the smaller box first and remove the contents.
STEP 2:Join the blade halves using the hardware provided (middle first).
STEP 3:Install the scraper blade using the pre-inserted hardware (center
piece first).
•Hand tighten all hardware.
•Flip blade upright for easier access to tighten/secure nuts on
carriage bolts.
STEP 4:Install the skid shoe bracket cupping upwards.
•Place lip of bracket underneath lip of plow blade and secure
by tightening nuts.
STEP 5:Install the skid shoe and tighten to set your height. You can adjust
this later to be desired height.
STEP 6:Unroll rubber and fasten to the top of the blade using the deflector
bars and provided hardware.
•Holes on the end of the blade are fastened using the plow
markers.
WATCH OUR ASSEMBLY VIDEO HERE
https://www.youtube.com/watch?v=Rob76MYqt70&t=71s