Instructions / Assembly

v.220511 | 13
OPERATION
PROPER USE GUIDELINES
BEFORE STARTING ENGINE
IF YOUR UNIT WILL NOT START
CLEAR AREA OF ALL PEOPLE AND PROPERTY THAT COULD BE DAMAGED. THINK SAFETY. THIS
CHIPPER CAN CAUSE INJURY IF SAFETY IS NOT ENFORCED. ONLY ONE OPERATOR SHOULD
WORK ON THIS UNIT. NEVER HAVE ANOTHER PERSON IN THE AREA OR IN FRONT OF THE CHIP
EXPULSION CHUTE.
1. Check the oil level. Your engine has a low oil shuto protection and will not start if low on oil.
2. Make sure spark plug wire is seated.
3. Move the gas lever on to the right. Left position is o.
4. Use the choke if needed to start in cold weather.
5. Check your gas level.
• DO NOT WEAR LOOSE FITTING CLOTHES THAT COULD GET STUCK IN THE RAM.
• ONLY CHIP WOOD, NO METAL OR PLASTIC OR RUBBER. WOOD ONLY.
• CHILDREN SHOULD NOT RUN THIS EQUIPMENT.
• STAY ALERT OF YOUR SURROUNDINGS AND PERSONS THAT COULD APPEAR IN THE AREA
WHILE YOU ARE WORKING.
• LOAD TREES INTO FEED CHUTE. ADJUST FEED ROLLER TO SLOW FOR LARGER TREES
AND FASTER FOR SMALLER TREES. USE LEVER IN CENTER OF FEED CHUTE TO CONTROL
FORWARD/NEUTRAL/REVERSE OF FEED ROLLER.
• IF ENGINE SPEED IS REDUCED WHEN CHIPPING, ADJUST THE ROLLER SPEED.
• WEAR SAFETY GLASSES, GLOVES AND PROTECTIVE SHOES.
• OPERATE OUTDOORS ONLY - GAS FUMES ARE DEADLY INDOORS.
RUN ENGINE AT FULL RPM. ALLOW MACHINE TO REGAIN RPM BETWEEN CHIPPING AND NEVER
DISCONNECT SAFETY SWITCHES OR RUN WITH COVERS OPEN.
ENGLISH