Operation Manual

- 25 -
Select a memory (1-7) with the / -buttons
Press the MENU/REPEAT button once again.
Select memory
Press repeately the MEM SD-USB-button until the desired
frequency appears in the display.
With every keystroke on the MEM SD-USB-button the next
memory is selected.
Adjust audio input level (Audio in)
In order to have the best signal quality, it is necessary to adjust
the volume of the connected audio device. Follow the below
guideline:
Start playback of the audio device. Adjust the volume to a low
level. Now increase the level until the noise disapears. Keep
the level in mind. Increase the level until a distortion is heard
in the radio. Keep also this level in mind. Now adjust the vo-
lume level to the middle of these 2 values, which you have
determined.
Folders and Files
The device can manage up to 1999 fi les. You can
make folders in the main directory to manage fi les
easier. The folders will be played in the same order
as they are copied onto the memory device. The
MusicFly Select fi nds up to 20 folders. This folders
are shown briefl y in the display as d1-d20. If no
folder is selected the tracks are played in order.
Feature of supporting fi le index
MusicFly Select has fi le index feature that lets you set the play
list as you want. If you use a 3-digit number at the head of fi le
names of each folder, MusicFly Select plays the fi les in order.
If there are the fi les with given numbers and the fi les without
numbers in one folder, MusicFly Select plays the fi les that have
numbers fi rst and then plays the other fi les.
operation
MFlysSlect DEFN.indd 25MFlysSlect DEFN.indd 25 23.10.2008 16:33:0423.10.2008 16:33:04