Instructions / Assembly

DocaPole 24ft Big Reach Hook Kit Assembly Instructions

1. To adjust extension pole length, raise thumb levers

and pull out pole segments to desired length, then

lower thumb levers to lock into place

2. Use the plastic hinge tip as needed to adjust the angle

of the desired attachment. Simply screw the female

plastic hinge tip directly onto the male metal tip of

the pole, then screw your attachment onto the angled

hinge tip (make sure it is locked into place by turning

the dial on the side).

3. Screw the Big Reach Hook onto the Metal Tip of the

Pole. If you need the hook to be at an angle, use the

included plastic Hinge Tip and adjust the angle as

needed

4. Enjoy your DocaPole and Big Reach Hook!

PAGE 1
DocaPole 24ft Big Reach Hook Kit Assembly Instructions 1. To adjust extension pole length, raise thumb levers and pull out pole segments to desired length, then lower thumb levers to lock into place 2. Use the plastic hinge tip as needed to adjust the angle of the desired attachment. Simply screw the female plastic hinge tip directly onto the male metal tip of the pole, then screw your attachment onto the angled hinge tip (make sure it is locked into place by turning the dial on the side). 3.