Instructions / Assembly

DocaPole 30ft 3-Brush Cleaning Kit Assembly

Instructions

1. To adjust extension pole length, raise thumb levers

and pull out pole segments to desired length, then

lower thumb levers to lock into place

2. Use the plastic hinge tip as needed to adjust the

angle of the desired attachment. Simply screw the

female plastic hinge tip directly onto the male metal

tip of the pole, then screw your attachment onto the

angled hinge tip (make sure it is locked into place by

turning the dial on the side).

3. Screw your brush of choice directly onto the Metal

Tip of the Pole. If you need the brush to be at an

angle, use the included plastic Hinge Tip and adjust

the angle as needed.

4. Enjoy your DocaPole and 3 Brush Cleaning Kit!

PAGE 1
DocaPole 30ft 3-Brush Cleaning Kit Assembly Instructions 1. To adjust extension pole length, raise thumb levers and pull out pole segments to desired length, then lower thumb levers to lock into place 2. Use the plastic hinge tip as needed to adjust the angle of the desired attachment. Simply screw the female plastic hinge tip directly onto the male metal tip of the pole, then screw your attachment onto the angled hinge tip (make sure it is locked into place by turning the dial on the side). 3.