User Manual

11
OPERATING
OPERATING THE
The collar has three beeper
modes along with constant and nick stimulation
from the electric collar.
In the "Run/Point" mode it emits a double beep
every 7.5 seconds while the dog is running. In the
"Point" mode it remains silent while the dog is
running. In both the "Run/Point" and "Point" mode,
the collar gives a double beep every two seconds
while the dog is on point.
The collar will emit a rapid series of beeps as
long as the “Locate” button is held down. The
training collar features both constant and nick
stimulation. Stimulation automatically shuts off if
the constant button is depressed for 12 seconds or
more.
The beeper function is selected with the bottom
button (“Mode”) and the top button (“Locate”) on
the side of the transmitter.
E-collar function is selected with the bottom
button (“Constant”) and the top button (“Nick”) on
the front of the transmitter.
10
OPERATING
To activate the beeper unit press the MODE
button on the side of the transmitter. (
Note : the
ON/OFF button on the dog collar/receiver must be
activated for the beeper to operate.)
The first time you press the MODE button,
the collar will beep twice. The beeper unit will
always start in the Run/Point mode where the collar
beeps every 7.5 seconds when the dog is running
and beeps every two seconds when the dog is
stationary/on point.
To select the point mode press the MODE
button a second time. The collar will beep once.
It is now in the point mode where the beeper will
beep every two seconds when the dog is
stationary/on point and is silent when the dog is
running.
NOTE : Changing the Tone when operating in
the Run/Point or Pointing mode.
In the Run/Point or Pointing mode the tone can be
changed by pressing the Locate button when the
High/Low tone toggle switch is in the desired
position. *The unit must be activated and in the
Run/Point or Pointing mode first.