CONTENTS MAIN FEATURES 2 PRODUCT SAFETY AND HEALTH STATEMENTS 3 PACKAGE CONTENTS 4 DESCRIPTION OF TRANSMITTER PARTS 5 BUTTON FUNCTION 13 DESCRIPTION OF COLLAR/RECEIVER PARTS 17 BATTERY CHARGER 21 TESTING YOUR COLLARS 22 FITTING THE COLLAR ON THE DOG 24 CHARGING THE BATTERIES 26 RECEPTION 29 ACCESSORIES 30 BASIC MAINTENANCE 31 TROUBLE SHOOTING GUIDE 32 WARRANTY AND REPAIR INFORMATION 35 1
MAIN FEATURES PRODUCT SAFETY AND HEALTH STATEMENTS PRODUCT SAFETY AND HEALTH STATEMENTS MAIN FEATURES Easy-to-use, ergonomic transmitter. Rheostat dial allows for gradual increases in stimulation intensity with no jumps between levels (0-127). Two-dog models allow the trainer to control two different dogs from one transmitter without the hassle of handling unnecessary parts. range. has a 3/4-mile Stimulation type- Nick , Constant and nonstimulating pager/vibration.
PACKAGE CONTENTS COLLAR PACKAGE CONTENTS DESCRIPTION OF TRANSMITTER PARTS DESCRIPTION OF TRANSMITTER PARTS transmitter (1-dog) Transmitter Receiver (two collar receivers for two-dog models) Antenna Battery charger and splitter cable Test light ON/OFF Magnetic Red Dot Rheostat Intensity Dial Owner’s manual Carrying case Indicator Light (LED Window) ON/OFF Switch “Nick” Button “Constant” Button Pager Button LCD Screen 4 Battery Charging Receptacle & Rubber Plug 5
DESCRIPTION OF TRANSMITTER PARTS DESCRIPTION OF TRANSMITTER PARTS DESCRIPTION OF TRANSMITTER PARTS transmitter (2-dog) Transmitter Antenna Antenna On/Off Magnatic Red Dot Rheostat Intensity Dial Indicator Light (LED Window) 1st-dog Nick & Cont. (Brown Button) 2nd-dog Nick & Cont. (Orange Button) Nick/Cont. Toggle Switch The antenna must be fastened to the transmitter before using the unit.
DESCRIPTION OF TRANSMITTER PARTS DESCRIPTION OF TRANSMITTER PARTS Care for LCD Transmitters in Cold Temperature In cold temperatures (10 degrees F or below), the Liquid Crystal Display (LCD) on your transmitter may be dim or slow to respond. Wait until the display becomes visible before selecting any training level. LCD Screen The LCD screen indicates the stimulation level (0-127) on the screen.
DESCRIPTION OF TRANSMITTER PARTS Transmitter Indicator Light (LED Window) The transmitter LED indicator light is located near the Rheostat Intensity Dial. It will flash every 4 seconds when the transmitter has been turned on. The color of the light indicates the status of battery life. It flashes green when the battery is fully charged and turns to amber when the battery is at medium charge. It is acceptable to charge your unit even at medium charge without any damage incurred to your collar.
BUTTON FUNCTION BUTTON FUNCTION BUTTON FUNCTION “Constant” Button (1-dog) Nick Pager The “Constant” button is located on the bottom left. Pressing the “Constant” button gives continuous stimulation as long as the button is pushed, for up to 12 seconds. If the button is not released after 12 seconds, the stimulation will automatically turn off as a safety feature. The collar will be ready to be reactivated once the button has been released.
BUTTON FUNCTION BUTTON FUNCTION (2-dog) 1st-dog Nick & Cont. (Brown Button) Nick/Cont. Toggle Switch ON/OFF Switch 1st-dog Pager (Brown Button) 2nd-dog Nick & Cont. (Orange Button) 2nd-dog Pager (Orange Button) The two-dog unit has five buttons and a toggle switch on the transmitter. Two on the face of the transmitter, two on the left side, and one on the right side. “Nick” & “Constant” Toggle Switch Located on the face of the transmitter is a toggle switch.
DESCRIPTION OF COLLAR / RECEIVER PARTS DESCRIPTION OF COLLAR / RECEIVER PARTS DESCRIPTION OF COLLAR / RECEIVER PARTS Collar strap Battery Charging Receptacle and Cover Receiver ON/OFF Magnetic Red Dot To activate the receiver/collar, place the red dot on the back of the transmitter to the red dot on the collar/receiver. Hold the two red dots together for a moment until the LED light on the receiver/collar comes on.
DESCRIPTION OF COLLAR / RECEIVER PARTS Receiver Indicator Light (LED window) Located on the front of the receiver/collar, the indicator light comes on and blinks once every 4 seconds after the collar has been turned on. The color of the LED indicates the battery life of the receiver.
TESTING BATTERY CHARGER BATTERY CHARGER TESTING YOUR Charging Cable 120 volt Charger COLLARS Wall Outlet Two-dog unit only The battery charger and charging cables allow you to charge both the transmitter and receiver at the same time. The battery charger is designed for a 120-volt wall outlet. (European 230-volt AC chargers and 10-volt field charger for Lithium-Polymer batteries for your automobile are also available.
TESTING 3. Turn the transmitter on by pressing the blue button on the right side of the transmitter until the LCD screen illuminates. The LCD screen shows the amount of battery life remaining and the LED blinks once every 4 seconds. FITTING THE COLLAR ON THE DOG FITTING THE COLLAR ON THE DOG 4. Watch the test light as you push the “Nick” button on the transmitter. It should light for just a moment. 5. Watch the test light as you push the “Constant” button on the transmitter.
FITTING THE COLLAR ON THE DOG points and Anti-microbial plastic to protect the dog’s skin. CHARGING THE BATTERIES CHARGING THE BATTERIES ATTENTION! Avoid having the dog wear the collar for more than 8 hours out of every 24-hour period. Leaving the points on the same spot for extended periods of time can cause skin irritation. If the dog is to wear the e-collar for long periods, occasionally reposition the collar so that the contact points are moved to a different spot on the dog’s neck.
CHARGING THE BATTERIES Recharge the unit if : The indicator light on the collar is emitting a red color. If the 3 bar indicator on the transmitter LCD shows just 1 bar. The indicator light on the transmitter or receiver will not come on. The indicator light on the transmitter or receiver comes on momentarily, but will not stay on when the “Constant” button is pushed. Battery Charging Procedure charger for Europe.) When properly plugged in, all indicator lights should glow red.
RECEPTION ACCESSORIES RECEPTION The collar has a range of 3/4-mile. Depending on the way you use your transmitter, the transmitter range may vary. Hold the transmitter away from your body and avoid touching the antenna, to get the greatest range. For maximum signal strength, keep your unit properly charged. ACCESSORIES The following items may be purchased separately by calling our customer service at (888) 811-9111. You may also browse the selection at shop.dogtra.
BASIC MAINTENANCE BASIC MAINTENANCE Be sure that the rubber charging plugs are always secured when the collar is in use. If your plugs break or are ripped, please contact Customer Service at info@dogtra.com or (888) 811-9111 to obtain replacements. After each session, carefully inspect your unit for any missing parts, or casing damage. Broken casings on either the receiver or transmitter may affect the waterproof guarantee of the unit.
TROUBLESHOOTING GUIDE 2. The test light comes on, but I do not feel any stimulation. - Your tolerance may be higher than your dogs, or your skin very thick, so you may need to try the unit on your fingertips where sensitivity is higher. Be sure both contact points are touching your fingertips. - The battery may be low, check the LED light for battery life. - If you have a full charge, and you have done all of the above, your unit may need to be serviced. Please contact Customer Service at info@dogtra.
WARRANTY WARRANTY AND REPAIR INFORMATION 2-Year Limited Lifetime Warranty Dogtra Company provides the original purchaser with a 2-YEAR WARRANTY for the 175NCP, 180NCP, 200NCP Gold Series, 210NCP Series, 280NCP Series, 300M Series, 1400NCP Series, 1500NCP Series, 1600NCP Series, 1700NCP Series, 1800NC Series, 1900NCP Series, 2000T&B Series, 2200NCP Series, 2300NCP Series, 2500T&B Series, 3500NCP Series, and the SureStim Series. The warranty begins from the date of purchase.
WARRANTY Dogtra reserves the right to retain and discard any parts or accessories that have been found damaged upon replacement and repair. Procedure for Repair Work If the unit is malfunctioning, please refer to the “Trouble Shooting Guide” in the Owner’s Manual and call customer service at 1-888-811-9111, for technical support, before sending it to Dogtra for Service. The cost of shipping products under warranty back to Dogtra is the customer’s responsibility.