Manual

TROUBLESHOOTING
PROPER FIT
A proper fit is necessary for the iQ No
Bark Collar to work optimally. Both
contact points must be in contact with
your dog’s skin at all times for a
consistent stimulation. A loose fitting
collar can cause the contact points to
rub against the skin and cause irritation.
REPLACING THE BATTERIES
- Using a coin, unscrew the battery
cover counterclockwise.
- Insert two batteries with the plus sides
facing out.
- Check to make sure that the rubber
gasket is in place, and screw in the
battery cover clockwise.
1. When do I replace the batteries on my iQ No Bark Collar?
- If the unit is not activating or the LED indicator does not turn on, the
batteries may need to be replaced. Overall battery life will be dependent
on usage. With the iQ No Bark Collar activating around 10 times a day,
the battery will have an average life of about 2-weeks.
- To clean the iQ No Bark Collar, make sure the battery cover is closed
and fully sealed, and wipe down the unit with a damp cloth and some
alcohol. Make sure the unit is completely dry before use.
2. My dog is not reacting to the iQ No Bark Collar.
- Check the LED indicator light to see that the iQ No Bark Collar has
enough battery life.
- Tighten the collar strap around your dog’s neck if it is too loose and
make sure the contact points are held firmly against the dog’s skin.
- If your dog has a thick or long coat, you may need to trim the hair on
the dog’s neck, so that both contact points are touching the dog’s skin.
- 5 -
* When the batteries are placed incorrectly, the LED indicator light may
turn on, but the unit will not operate properly.