Specifications

10
Transmitter
Inside Wall
Zip Cord
Power
Supply
Outside Wall
Surge Protector
Ground Wire
Ground
Rod
Twisted Wire
Boundary Wire
Ground
Wire
Adjusting the Receiver Collar
1. The collar should be worn snugly on the
dog’s neck.
This is extremely important!
2. Place no more than one thumb width
between the contact post and dog’s
neck.
3. When checking snugness of collar, the
dog’s neck should be facing down
(sniffing position) as this is where the
dog’s neck is the smallest.
4. If the collar is too tight, the receiver unit
will stick out to the side when the dog
shakes his head.
5. If the collar is too loose, the dog will not
receive the intended correction when
he or she wanders into the Avoidance
Zone.
6. Remember to periodically check for
irritation around the dog’s neck.
7. DogWatch strongly recommends
that the collar be removed daily and
when the dog is inside the house.
How The DogWatch System Is Installed