Specifications

1
1
Important Reminders:
u Keep the transmitter and receiver collar out of reach of children.
u Never attempt to service the receiver or transmitter yourself.
u Be sure your transmitter and surge protector are properly grounded.
u Fit the collar snugly around your dog’s neck.
u Make sure that battery is fresh and is inserted correctly.
u Train your dog as outlined in the DogWatch Owner’s Guide.
u Never adjust the transmitter while your dog is wearing the receiver collar.
Troubleshooting The System
If your dog is not staying within the boundary created by the DogWatch
®
Hidden
Fence System, check the following:
u Is the battery in the receiver collar depleted? See Test Light on Page 7.
u Is the battery installed properly? See Battery Insertion on Page 4 and 5.
u Is the receiver operating properly? See Test Light on Page 7.
u Is the transmitter on and adjusted properly? See Power On/Off on Page 3.
u Is the signal field too narrow? See Signal Range on Page 3.
u Is the Rate level too low? See Rate on Page 3.
u Is the Mode switch in the proper position? See Mode on Page 3.
u Is the boundary wire unplugged? See Illustration on Page 2.
u Is the boundary wire broken? See Boundary Loop on Page 10.
Other troubleshooting tips are available on line at www.dogwatch.com. If you are
unable to determine the cause of the problem, please contact your Authorized Dealer.