Specifications

4
9. PowerPak
™: Optional battery back-up system keeps the transmitter operating in the
event of a power failure. When transmitter is being powered by battery back-up, the
red power light will remain off. PowerPak plugs into the transmitter at “P-PAK”.
10. Model Switch: This switch sets your transmitter to work with your specific receiver(s).
Your DogWatch Dealer will set the switch in the “up” position. The Transmitter must
be turned off when setting or changing this switch.
Performance Series R7 and R8 Receivers
The lightweight radio receiver worn by the dog identifies the coded FM radio signal
from the boundary wire. It creates an audible warning followed by stimulation if he
comes too close to the boundary wire. It operates on a replaceable battery and is
waterproof when the battery cap is securely fastened.
Battery Insertion Instructions
Important: You must reset the “Battery Reminder” Feature when you change the
battery. See “Battery Replacement Reminder on page 6.
R7 Battery: The Performance Series receiver is powered by a 3 volt 1/3 N lithium bat-
tery. The receiver is designed for a 6 month battery life. The positive (+) end of the
battery must be inserted up. (Figure 1)
R8 Battery: The R8 battery is powered by a 3.6 volt lithium battery. The receiver is
designed for long battery life of up to two years.
The positive (+) end of the battery
must be inserted down. (Figure 2)
Battery Plans: Ask your DogWatch Dealer about a battery plan. If your DogWatch
Dealer does not have a battery plan, you can join the DogWatch Battery Program,
where a new battery is mailed to you every 6 or 24 months. Call DogW
atch at 800-793-
3436 or join through the DogWatch Web Site at www.dogwatch.com.
Important: When you remove the receiver collar from your dog at night, do not store
it near or on a television.
Please note battery handling instructions marked on the bat
-
tery and on the diagram above.
Figure 1
Insert R7 Battery Positive End UP.
Insert R8 Battery Positive End DOWN.
Figure 2