User`s guide

Chapter 4 61
Using On-Screen Menus
Enter Zip Code
This feature allows you to find dish-pointing coordinates from your local zip
code.
1. In the Dish Pointing menu, use the remote control’s arrow buttons to select
Enter Zip Code.
2. Use the numeric buttons on the remote control to enter in the proper zip
code.
3. After entering the final digit, the receiver displays the dish-pointing
coordinates. For convenience, record the numbers in the spaces below.
Note: If you have a round satellite antenna, you will not see numbers for
Tilt. Tilt applies only for satellite antennas with more than one LNB.
Dish-pointing Coordinates
Elevation ____________ Azimuth ____________
Tilt (oval satellite dish only) _____________________
Select by City
Allows you to choose major cities from selected states to find dish-pointing
coordinates.
Enter Lat/Long
Allows you to find dish-pointing coordinates from latitude and longitude
entries. Latitudes between 20 and 55 can be entered, and longitudes between
65 and 125 can be entered.
Signal Meter
This feature allows you to determine the strength of all available signals, one at
a time. There is a separate test for each satellite from which your antenna
receives information.
LNBs
An oval satellite dish with two LNBs
(not provided with all systems).
Tip
Azimuth is the side- to-side
direction that the satellite dish
antenna is pointed.
Elevation is the up/down angle that
the satellite dish antenna is
pointed. Tilt is the circular rotation
of the dish itself, like the motion of
a steering wheel.