Instruction manual

7
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
END008-1
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
................. Take particular care and attention.
................ Read instruction manual.
................ Danger; be aware of thrown objects.
................ The distance between the tool and
bystanders must be at least 15 m.
.......... Keep bystanders away.
....... Keep distance at least 15 m.
............... Avoid kickback.
................ Wear a helmet, goggles and ear
protection.
................. Wear protective gloves.
................ Wear sturdy boots with nonslip soles.
Steeltoed safety boots are
recommended.
................ Do not expose to moisture.
................. Top permissible tool speed.
.......... Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
1. Red indicator
2. Slide button
3. Battery cartridge
4. Lock-off button
5. Switch trigger
6. Reversing switch
7. A position depressed for normal
operation
8. B position depressed for weed
and debris removal
9. Speed change switch lever
10. Indication lamp
11. Most effective cutting area
12. Indicator lamps
13. CHECK button
14. Knob
15. Handle clamp
16. Handle holder
17. Compression spring
18. Barrier
19. Grip
20. Spacer
21. Cutter blade
22. Guard
23. Nylon cutting head
24. Guard extension
25. Two bolts
26. Protector cover
27. Hex wrench
28. Receive washer
29. Clamp washer
30. Cup
31. Hex nut
32. Threaded spindle
33. Lever
34. Buckle
35. Grease hole
36. Gear case
37. Cover
38. Latches
39. Press
40. Spool
41. For left hand rotation
42. Notches
43. Eyelets
44. Protrusion (Not shown)
45. Slot of the eyelet
Model AT-3623/AT-3624 AT-3630/AT-3631
Type of handle Bike handle Loop handle
No load speed
High 0 - 7,300 min
-1
0 - 6,600 min
-1
Low 0 - 5,300 min
-1
0 - 4,900 min
-1
Overall length 1,880 mm 1,850 mm
Cutting blade diameter 230 mm -
Cutting diameter with nylon cutting head - 300 mm
Net weight 7.1 kg 5.9 kg
Rated voltage D.C. 36 V
Standard battery cartridge(s)
Warning: Use only the battery cartridge(s) described.
AP-363/AP-3622
Cd
Ni-MH
Li-ion