Manual

19
CoolFreezeTechnical Data
CF-18
➤ Slide the sliding switch (Fig. 3 4, page 4) to “LOW” or “HIGH”
battery protection (See 6.4 “using the battery monitor” for suitable
level).
✔ The “POWER” LED is lit green.
✔ The cooler starts cooling the interior.
✔ When the cooling temperature has been reached, the “POWER” LED
is lit amber.
CF-25, CF-35, CF-40, CF-50, CF-60
➤ Press the “ON/OFF” button (Fig. 4 1, page 5) and hold down for
between one and two seconds.
✔ The “POWER” LED lights up.
✔ The display (Fig. 4 5, page 5) switches on and shows the current
temperature.
Note – Displayed temperatures (Digital display models only).
CF-25, CF-35, CF-40, CF-50, CF-60 (Not CF-50DZ)
The temperature displayed is that of the middle of the large interior
compartment.
CF-50DZ
i With plastic dividers in: the display temperature is that of the
middle of the freezer compartment (furthest away from control
panel).
ii With plastic dividers removed: the actual compartment
temperature will be considerably warmer than the displayed
temperature.
ALL MODELS
Temperatures elsewhere in the compartment (away from centre) will
deviate from the displayed temperature.
✔ The cooler starts cooling the interior.
Locking the cooler
➤ Close the lid.
➤ Press the lock (Fig. 2 1, page 4) down, until it latches in place
audibly.
CF18-60_M_81003:PowerVac_PV-100 3/9/08 3:53 PM Page 19