Manual
21
CoolFreeze
➤ Take out the contents of the cooling device.
➤ If necessary, place them in another cooling device to keep them
cool.
➤ Switch off the device.
➤ Leave the cover open.
➤ Wipe off the defrosted water.
6.10 Replacing the device fuse (240V)
Only CF-35, CF-40, CF-50, CF-60
Caution – Danger of electrocution!
Disconnect the connection cable before you replace the device fuse.
➤ Pull off the connection cable.
➤ Pry out the fuse insert (Fig. 6 2, page 5) with a screwdriver.
➤ Replace the defective fuse with a new one that has the same
rating (T4,0AL 250V).
➤ Press the fuse insert back into the housing.
6.11 Replacing the plug fuse (12/24 V)
➤ Pull the adapter sleeve (Fig. 9 4, page 6) off of the plug.
➤ Unscrew the screw (Fig. 9 5, page 6) out of the upper half of the
housing (Fig. 9 1, page 6).
➤ Carefully raise the upper half of the housing from the lower
(Fig. 9 6, page 6) half.
➤ Take out the contact pin (Fig. 9 3, page 6).
➤ Replace the defective fuse (Fig. 9 2, page 6) with a new one that
has the same rating (8A 32V).
➤ Re-assemble the plug in the reverse order.
CF18-60_M_81003:PowerVac_PV-100 3/9/08 3:53 PM Page 21