Manual

22
CoolFreeze
6.12 Replacing the light bulb
Only CF-25, CF-35, CF-40, CF-50, CF-60
➤ Press the switch pin (Fig. 10 2, page 6) downwards so that the
transparent part (Fig. 10 1, page 6) of the lamp can be removed
at the front.
➤ Replace the light bulb ensuring that:
i) the LED’s inside the bulb face toward the transparent cover
ii) the polarity is correct. Test for operation and if the new bulb
does not work fit it the other way around.
➤ Press the lamp back into the housing.
7 Cleaning and maintenance
Caution – Danger of electrocution!
Always pull out the mains plug before you clean and service the device.
Caution – Danger of damaging the device!
Never clean the device under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during cleaning as
these can damage the device.
Never use brushes, scouring pads or hard or pointed tools to remove ice
or to loosen objects which have frozen in place.
➤ Occasionally clean the inside of the device with a damp cloth.
8 Warranty
Our general warranty conditions apply. If the product is defective, please
take it to the nearest authorised WAECO repair agent.
For warranty repair processing, please present copy of the receipt with
purchase date.
CF18-60_M_81003:PowerVac_PV-100 3/9/08 3:53 PM Page 22