Service manual

18
- Pop out wire plug from thermostat switch, pull off thermostat switch from
the thermostat switch’s axis with a universal plier with protective coating.
(Fig. 78, 79)
- If the gasket slips off of the thermostat switch, remove it from the bore with
a magnetic screwdriver, detach it to the driving bolt. Reinsert the plug into
the bore, set aside switch. (Fig. 80, 81)
- Lay refrigerator onto door, support if necessary.
- Remove thermostat cover. (Fig. 82, 83)
- Remove electrical wire from thermostat.
- Unscrew securing screws from thermostat. (Fig. 84)
- Dismount thermostat case by loosening the locking nut. (Fig. 85)
- Pull out thermostat capillary from refrigerator cabinet, remove defective
thermostat.
Figure 78 Figure 79
Figure 80
Figure 81
Figure 82
Figure 83