Service manual

23
Final assembly of temperature controller, mounting onto aggregate:
(This procedure is not necessary for appliances with no temperature controller)
Figure 99 presents the necessary elements and tools, for your information.
- Cut the wire of the temperature controller to size, according to the size of the wire
of the temperature controller on the replaced aggregate. (Fig. 100)
- From the connection kit, choose the connection elements that are identical to the
original temperature controllers.
- Press connection elements with press tool. (Fig. 101)
- Pull insulation sockets onto connectors. (Fig. 102)
Figure 99
Figure 100 Figure 101 Figure 102