Service manual

25
- Secure freezer compartment with 2 plate screws. Only the original
corrosion-proof screws or screws of identical quality may be used.
(Fig. 107)
- Place cooling flange back, secure with 4 plate screws. Again, only
corrosion-proof screws may be used. (Fig. 108)
- Place refrigerator in upright position, remove any metal shavings from
internal areas.
- Check electrical insulation resistance according to section 2.3.3.
Information:
Certain devices do not include all of the elements (lock, lamp, hinge).
Parts of the instructions describing this do not apply to such devices.
Jászberény, 12/12/2003 Compiled by: László Kaszab
Technologist engineer
Rev. : A
Figure 107 Figure 108