Service manual

5
2.2. Cabinet, door
2.2.1. Adjusting right and left-hand swing door
- Unscrew top door mount screws. (Fig. 2)
- Unscrew door mount hole cover screws. (Fig. 3)
- Open door.
- Pull top door mount by tilting door. (Fig. 4)
- Set aside door mount, unhinge door from bottom door mount pin.
- Pull door mount hole cover. Help with standard screwdriver when pulling.
- Place cabinet on its back carefully so that the hinge is not damaged.
- Install bottom door mount on opposite side. (Fig. 5, 6)
- Unscrew door mount pin from top door mount, then screw from opposite
direction and tighten. (Fig. 7, 8, 9)
Figure 2 Figure 3 Figure 4
Figure 5 Figure 6
Figure 7
Figure 8
Figure 9