PSB150W-IO-AUS.book Seite 1 Donnerstag, 2.
PSB150W-IO-AUS.book Seite 2 Donnerstag, 2. August 2018 9:15 09 Explanation of symbols PSB150 Please read this instruction manual carefully before installation and first use, and store it in a safe place. If you pass on the product to another person, hand over this instruction manual along with it. Table of contents 1 Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 General safety instructions . . . . . . . . . . . . . . . . . . . . . . .
PSB150W-IO-AUS.book Seite 3 Donnerstag, 2.
PSB150W-IO-AUS.book Seite 4 Donnerstag, 2. August 2018 9:15 09 General safety instructions A NOTICE! • Check the manufacturer‘s data for your battery and ensure that the maximum voltage of the solar charge controller does not exceed the manufacturer‘s recommended charging voltage. • Do not use the device to charge non-rechargeable batteries. • Be sure to connect the battery before exposing the solar blanket to the sun. • Store the device in a dry and cool place. 2.
PSB150W-IO-AUS.book Seite 5 Donnerstag, 2. August 2018 9:15 09 PSB150 General safety instructions 2.3 Operating the device safely ! CAUTION! A EN • Do not use the solar blanket in windy or gusty conditions until it is safely secured through 6 eyelets.
PSB150W-IO-AUS.book Seite 6 Donnerstag, 2. August 2018 9:15 09 Scope of delivery 3 PSB150 Scope of delivery 1 1 2 3 P/ AMLT VO Y ER TT BA PE TY s ng setti for Ho lar Soargeller chntro co Volt 12 Amp 15 Ba Ch arg ing sta tte ry co nd itio 4 ld n tus 5 6 8 No. in fig.
PSB150W-IO-AUS.book Seite 7 Donnerstag, 2. August 2018 9:15 09 PSB150 4 Intended use Intended use The portable solar blanket is a mobile power supply with a solar charge controller for charging a 12 Vg battery. 5 Technical description The portable solar blanket consists of lightweight solar cells with anti-reflective, scratch-resistant ETFE coating. The solar charge controller stored in a bag of the blanket can be used to charge a 12 Vg battery.
PSB150W-IO-AUS.book Seite 8 Donnerstag, 2. August 2018 9:15 09 Technical description 5.1 PSB150 Connecting and operational elements 2 1 2 Solar charge controller 12 Volt 15 Amp AMP/ VOLT 3 BATTERY TYPE Hold for settings Charging status Battery condition 4 5 No. in fig.
PSB150W-IO-AUS.book Seite 9 Donnerstag, 2. August 2018 9:15 09 PSB150 5.2 Technical description Display elements 4 1 100% V 2 3 LiFeP04 LT0 GEL AGM WET CALCIUM 4 No. in fig. 4 EN Description 1 Indicates that the solar blanket is connected. 2 Indicates the charging status of the battery. 3 Indicates the parameters.
PSB150W-IO-AUS.book Seite 10 Donnerstag, 2. August 2018 9:15 09 Using the solar blanket 6 A 6.1 PSB150 Using the solar blanket NOTICE! Make sure that the solar blanket is always clean and dry (chapter “Maintaining and cleaning the product” on page 17). Positioning the solar blanket Eyelets on four corners and sides of the portable solar kit provide different mounting options. This solar blanket can be mounted on a vehicle, caravan or tent to provide shade and provide power generation as well.
PSB150W-IO-AUS.book Seite 11 Donnerstag, 2. August 2018 9:15 09 PSB150 Using the solar blanket 6.2 Connecting the solar blanket A NOTICE! • Always observe the following connection sequence. Overvoltage can damage the electronics of the device. – Connecting the solar blanket: First, connect the Alligator clips to the battery, then connect the Anderson connections to the solar blanket.
PSB150W-IO-AUS.book Seite 12 Donnerstag, 2. August 2018 9:15 09 Using the solar blanket PSB150 Connecting the solar charge controller ➤ Connect the red lead of the battery cable (grey Anderson connector) to the positive (+) battery terminal on the solar charge controller. ➤ Connect the black lead of the battery cable (grey Anderson connector) to the negative (–) battery terminal on the solar charge controller.
PSB150W-IO-AUS.book Seite 13 Donnerstag, 2. August 2018 9:15 09 PSB150 Using the solar blanket ➤ Press and hold the Battery type button for 3 second to choose the battery type: – LiFePo4 – LTO – GEL – AGM – WET – Calcium Disconnecting and storing the solar blanket ➤ Disconnect the Anderson connectors from the solar blanket first, finally disconnect the Alligator clips from the battery.
PSB150W-IO-AUS.book Seite 14 Donnerstag, 2. August 2018 9:15 09 Using the solar blanket 6.3 PSB150 Operating the solar blanket Setting the battery type ! CAUTION! An incorrect battery type setting may damage your battery. Check your battery manufacturer’s specifications to select the correct battery type. The solar charge controller provides six battery types for selections: LiFePO4, LTO, Gel, AGM, WET (conventional lead acid) and Calcium. The default setting is AGM.
PSB150W-IO-AUS.book Seite 15 Donnerstag, 2. August 2018 9:15 09 PSB150 Using the solar blanket • Equalization Charge (4): Only for WET battery or CALCIUM battery type. When the battery is deeply drained below 10 V, it will automatically run this stage to bring the internal cells as an equal state and fully complement the loss of capacity. • Float Charge (5): Battery is fully charged and maintained at a safe level.
PSB150W-IO-AUS.book Seite 16 Donnerstag, 2. August 2018 9:15 09 Troubleshooting 7 PSB150 Troubleshooting If you are unable to rectify the fault, get in touch with a specialist workshop. Fault Possible cause Suggested remedy Device does not function, The device fuse is defective Replace the device fuse, see chapter “Replacing the fuse” on page 13. No battery connected Connect a battery. LED does not light. The LED is lit and the LED flashes The LED flashes.
PSB150W-IO-AUS.book Seite 17 Donnerstag, 2. August 2018 9:15 09 PSB150 8 Maintaining and cleaning the product Maintaining and cleaning the product A NOTICE! • Before cleaning the solar blanket, please make sure your solar blanket is cool. • Do not use any detergent to clean the solar blanket. • Do not use sharp or hard objects or cleaning agents for cleaning as these may damage the product. Prevent scratches on the surface of the solar blanket. • Do not use high pressure to clean the solar blanket.
PSB150W-IO-AUS.book Seite 18 Donnerstag, 2. August 2018 9:15 09 Technical data 11 PSB150 Technical data PSB150 Peak power (varies according to ambient condition, UV radiation, temperature etc.): 154.4 W Voltage at max. power (Vmp): 18.1 V Current at max. power (Imp): 8.53 A Open circuit voltage: 21.6 V Short circuit current: 9.13 A Operating temperature: 0 °C to +85 °C In-line fuse: 15 A, automotive, fast acting Dimensions: see chapter “Dimensions” on page 19 Net weight: 5.
PSB150W-IO-AUS.book Seite 19 Donnerstag, 2. August 2018 9:15 09 PSB150 Technical data Absorption to Equalizing or Float condition: – Charging current drops to: – Absorption charging timed out: 0.5 A ± 0.1 A 4 hours Equalization charging active (only for WET or CALCIUM battery): – Battery voltage discharged to less than: – Automatic equalizing charging periodical: – Equalization charging voltage at 25 °C: – Equalization charging timer timed out: 10 ± 0.2 Vg 28 days 15.5 ± 0.