Installation Instructions

Donaldson Company, Inc.
1400 West 94th Street
Bloomington, MN 55431 US
donaldson.com
shop.donaldson.com
North America 800-374-1374
Mexico, Latin America, &
Caribbean 52-449-300-2400
Brazil 55-11-4894-6339
Europe 32-16-38-3811
South Africa 27-11-997-6000
P290025 Revision 0 (11/19)
© 2019 Donaldson Company, Inc. All rights reserved. Donaldson Company, Inc. reserves the right to
change or discontinue any model or specification at any time and without notice. Printed in the U.S.A.
Southeast Asia 65-6311-7373
Greater China 86-400-650-0610
Japan 81-42-540-4112
Korea 82-2-517-3333
Australasia 61-02-4350-2033
India 91-124-4807-400
RF EXPOSURE:
This product complies with FCC and ISED radiation exposure limits set forth for
an uncontrolled environment. The antenna should be installed and operated with
minimum distance of 20 cm between the radiator and your body.
FCC STATEMENT WARNING:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
14. Zip ties are provided for securing the Easy Receiver. A reclosable
fastener (like Velcro
®
brand or 3M™ Dual Lock,™ pictured left) is
another option, but is not included in the kit.
• If using a reclosable fastener, select a flat surface on which to
mount it. Clear the surface of dust, oil, and moisture before
applying adhesive tape.
• Ensure that the receiver is held securely in place.
15. Trim the ends of the zip ties as close to its head as possible, as a
safety precaution, so as to not leave sharp ends.
Note: For sensor pairing instruction refer to supplemental
documentation.
Trimmed zip ties