User's Manual

QUICK SETUP GUIDE
Flat size (W×H): 431.8 × 279 mm.
Final folded size: 107.9 × 279 mm.
Connecting the speakers
1 Connect the black wires from the speakers or subwoofer to the black terminals on
the shelf system.
2 Connect the red wires from the speaker or subwoofer to the other terminals on the
shelf system: right speaker to red, left speaker to white, and subwoofer to purple.
Connecting the AC power
• Plug the power cord into an AC outlet.
Turning on your mini audio shelf system
1 Turn on the power switch on the back of your mini audio shelf system.
2 Press STANDBY on the front of your system or on the remote control.
Selecting the sound source
• Press SOURCE repeatedly on the front of your mini audio shelf system or one of
the Source buttons on the remote control to select CD, FM, USB, BT
(Bluetooth), or AUX. The source you select appears on the display.
Adjusting the volume
• After you select the sound source you want, turn the VOLUME knob to set the
volume to a comfortable level.
• Press (mute) to mute the sound. Press (mute) again or press VOL+ or
VOL– to turn the sound back on.
Using Bluetooth
Before you can use your mini audio shelf system with a Bluetooth device, you need
to pair your device to the mini audio shelf system.
Pairing a Bluetooth device
Your mini audio shelf system saves pairing information for up to eight devices, such
as phones and tablets. However, it can only be connected and playing content from
one device at a time.
1 Make sure that your Bluetooth device supports Bluetooth and is not
paired with another device.
2 Turn on your mini audio shelf system.
3 Press SOURCE repeatedly to select BT mode or press BT on the remote control.
“BT” appears on the display.
4
Make sure that your Bluetooth device is within 33 feet (10 m) of your mini audio
shelf system.
5 Turn on your Bluetooth device, turn on Bluetooth, then set your device to pairing
mode. For more information, see the documentation that came with your
Bluetooth device.
6 On your Bluetooth device, select “DX-SH115”. Your mini audio shelf system pairs
with the Bluetooth device.
7 On the Bluetooth device, enter 0000 as the PIN, if prompted.
If you are pairing with a computer, make sure that your mini audio shelf system is
selected as the computer’s default playback device. See the computer’s
documentation for instructions.
NOTES:
• Some devices, such as iPhone, connect immediately after pairing.
Other devices, such as notebook computers, may ask you if you want to connect.
• When you turn on your mini audio shelf system, it automatically connects to the
last connected device if that device is in range. To connect to a dierent paired
device, you have to turn o Bluetooth or unpair from the currently paired device
and manually connect to the other paired device.
Playback operation
• Playback is controlled by the Bluetooth device, by the buttons on the front of your mini
audio shelf system, and by the remote control (such as VOL+/–
+/–, , , and ).
Using a USB device
1 Connect the USB ash drive to the USB port on the front of the system.
2 Press SOURCE one or more times until “USB” appears on the display or press USB on
the remote control. Your mini audio shelf system automatically detects the device and
starts playback.
3 To control playback, use the controls on the mini audio shelf system or remote control.
NOTES:
• Depending on the amount of data and the media speed, it may take as long as 60
seconds for your system to read the contents of the USB device. This is not a malfunction.
• Even when the les are in a supported format, some may not play or display,
depending on the content.
• The le formats that your system can play are MP3 and WMA with .mp3 and .wma
extensions.
Using an AUX device
1 Make sure that your mini audio shelf system is turned o.
2 Plug one end of the RCA stereo audio cable (included) into the R and L AUX IN
jacks on the front of your mini audio shelf system and the other end into the
audio out or line out jacks on the audio device.
3 Press SOURCE one or more times until “AUX” appears on the display or press
AUX on the remote control.
4 Use the volume controls on your mini audio shelf system to control the volume.
5 Use the controls on the audio device to control playback.
NOTE: You can also use the volume controls on the device to adjust the volume,
but the volume control on your mini audio shelf system provides the best control.
Playing the radio
1 Press SOURCE repeatedly to select FM (Tuner) mode or press FM on the remote
control. “TUNER” appears on the display.
2 Adjust the volume to a comfortable level.
3 Press MO/ST to switch between mono and stereo Tuner mode.
4 To tune to a station, press the numbers buttons on your remote control to select
a specic frequency. For example, to listen to 99.7 MHz, press 9, 9, then 7. You
can also briey press TUNE + or TUNE - on the remote control to tune the
radio up or down one frequency step.
5 To scan to the next highest or lowest radio station with a strong signal, press
and hold TUNE + or TUNE - for three seconds.
NOTE: For information on saving and scanning to preset stations see your User
Guide.
Using your CD player
You can play audio CDs, CD-Rs, and CD-RWs.
1 Press SOURCE repeatedly to select CD mode.
2 Press to open the CD tray.
3 Insert a CD, label side up.
4 Press to close the CD tray.
5 Playback begins automatically.
6 Use the controls on the mini audio shelf system or remote control to
control playback.
NOTE: For more information on using your CD player, see your User Guide.
For additional information on using your Mini Audio Shelf System, refer to the User Guide.
Installing the remote control batteries
1 Press the battery compartment cover latch, then remove the cover.
2 Insert two AAA batteries (included) into the battery compartment.
Make sure that the + and – symbols on the batteries match the + and –
symbols in the battery compartment.
3 Replace the cover.
Connecting the FM antenna
1 Connect the FM antenna (included) to the FM ANT jack on the back of your mini
audio shelf system.
2 Adjust the antenna for best FM reception.
DX-SH115
Mini Audio Shelf System w/ Bluetooth
Package contents
• Mini audio shelf system, including:
• Speakers (2)
• Subwoofer
• Audio cable
• FM Antenna
• Remote control and batteries (2)
• User Guide
• Quick Setup Guide
R(4Ω) L(4Ω) SW(8Ω)
SPEAKERS
AUDIO OUTPUT
FM
ANT
75Ω
T
LEFT
RIGHT
SubwooferLeft Speaker
EQEQ
S
OU
R
CE
C
E
Player UnitRight Speaker
R(4Ω) L(4Ω) SW(8Ω)
SPEAKERS
120V~60Hz
AUDIO OUTPUT
FM ANT 75Ω
FCC ID:
IC:
DX-SH115
Max150W
Dynex
LEFT
RIGHT
R(4Ω) L(4Ω) SW(8Ω)
SPEAKERS
120V~60Hz
AUDIO OUTPUT
FM ANT 75Ω
LEFT
RIGHT
FM antenna jack
DX-SH115_15-0777_QSG_V5_ENG_Final.ai 1 9/23/2015 1:56:09 PMDX-SH115_15-0777_QSG_V5_ENG_Final.ai 1 9/23/2015 1:56:09 PM
V5
FINAL
FOR PRINT